Proficiency testing programmes are statistical quality assurance programmes that enable laboratories to assess their performance in conducting tests within their own laboratories when their data are compared against other laboratories across the world that participate in the same programmes.

“Fine Finish Proficiency Testing Provider” has a qualified and competent team of scientists, engineers and statisticians and is committed towards quality of its proficiency testing services.

Fine Finish Proficiency Testing Provider plans and operate Proficiency Testing Schemes (PT schemes) according to the International Standard (ISO/IEC 17043:2010 – Conformity assessment, General requirements for proficiency testing).

We are Accredited by NABL (National Accreditation Board for Testing and Calibration Laboratories) for carrying out Proficiency Testing Programmes

Fine Finish Proficiency Testing Provider conducts Proficiency Testing Schemes (PT rounds) in the field of Chemical, Mechanical, Electrical & Thermal Testing for the following matrices:
1. Plastics
2. Polymers
3. Paints
4. Composites
5. Oil
6. Coal
7. Steel etc.
Indian Standards, BSI, ISO and ASTM test methods are used in the PT schemes.

Proficiency Testing Programs (PT programs)- 2019- 2021

PT Scheme No. FieldPT ItemParametersReference StandardSchedule
FFOPL- PT001MechanicalPolypropyleneTensile Strength of PlasticsASTM D 638/ISO 527/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneElongation of PlasticsASTM D 638/ISO 527/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneE-modulus of PlasticsASTM D 638/ISO 527/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneDensityASTM D 792/ISO 1183/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneSpecific GravityASTM D 792/ISO 1183/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneWater Absorption of PlasticsASTM D 570/ISO 62/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneHeat Deflection TemperatureASTM D 648/ISO 75 –Part 1 & 2/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneFlexural StrengthASTM D 790/ISO 178/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneFlexural ModulusASTM D 790/ISO 178/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneFlexural StrainASTM D 790/ISO 178/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneCharpy ImpactASTM D 6110/ISO 179 /IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneIzod ImpactASTM D 256/ISO 180/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneHaze GlossASTM D 2457/IS 133602020- 2021
FFOPL- PT001MechanicalPolypropyleneVicat Softening TemperatureASTM 1525 /ISO 306/IS 133602020- 2021
FFOPL- PT001MechanicalPolypropyleneBarcol HardnessASTM D 2583/EN 59/ IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneMelt Flow IndexASTM D 1238-13/ISO 1133/IS 133602019- 2020
FFOPL- PT001MechanicalPolypropyleneAsh Content of PlasticsASTM D 5630/ISO 34512019- 2020
FFOPL- PT002ChemicalEpoxy ResinViscosity by Brookfield viscometerASTM D 2196/ IS 133602019- 2020
FFOPL- PT002ChemicalEpoxy ResinEpoxy ValueASTM D 16522019- 2020
FFOPL- PT002ChemicalEpoxy ResinEasily Hydrolyzable Chlorine ContentASTM D 17262019- 2020
FFOPL- PT002ChemicalEpoxy ResinSpecific Gravity @ 25ºCIS 9162
2019- 2020
FFOPL- PT002ChemicalEpoxy ResinViscometer by Falling Ball ViscometerISO 12058/IS 133602019- 2020
FFOPL- PT002ChemicalEpoxy ResinMoisture ContentIS 23622019- 2020
FFOPL- PT002ChemicalEpoxy ResinViscosity by Cone & Plate ViscometerASTM D42872019- 2020
FFOPL-PT003ChemicalEpoxy HardenerAmine ValueISO 97022019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishNon- Volatile Matter/ Volatile MatterIS 101 (Part 2/ Sec 2)/ IS 100262019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishViscosity by Flow Cup/ Consistency IS 101 (Part 2/ Sec 2)/ IS 100262019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishDensity IS 101 (Part 1/ Sec 7)/ IS 10026/ ASTM D14752019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishDrying Time of Paint/ VarnishIS 101 (Part 3/ Sec 1)/ IS 100262019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishFlexibilityIS 1012019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishScratch HardnessIS 1012020- 2021
FFOPL-PT004ChemicalAir Drying Paint/ VarnishPencil HardnessIS 100262019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishReaction of Varnish with CopperIS 100262019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishEffect of Varnish with Enamelled WireIS 100262019- 2020
FFOPL-PT004ChemicalAir Drying Paint/ VarnishResofteningIS 100262019- 2020
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneTensile Strength of PlasticsASTM D 638/ISO 527/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneElongation of PlasticsASTM D 638/ISO 527/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneE- Modulus of PlasticsASTM D 638/ISO 527/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneDensityASTM D 792/ISO 1183/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneSpecific GravityASTM D 792/ISO 1183/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneWater Absorption of PlasticsASTM D 570/ISO 62/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneHeat Deflection TemperatureASTM D 648/ISO 75 –Part 1 & 2/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneFlexural StrengthASTM D 790/ISO 178/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneFlexural ModulusASTM D 790/ISO 178/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneFlexural StrainASTM D 790/ISO 178/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneIzod ImpactASTM D 256/ISO 180/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneCharpy ImpactASTM D 6110/ISO 179 /IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneVicat Softening TemperatureASTM 1525 /ISO 306/IS 133602020- 2021
FFOPL- PT005MechanicalAcrylonitrile Butadiene StyreneMelt Flow IndexASTM D 1238-13/ISO 1133/IS 133602020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Ultimate Tensile StrengthISO 527-4/IS 13360ASTM D 30392020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)% ElongationISO 527-4/IS 13360ASTM D 30392020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Tensile ModulusISO 527-4/IS 13360ASTM D 30392020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Short Beam StrengthASTM D 2344/ISO 141302020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Combined loading Compressive Strength (CLC)ASTM D66412020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Combined loading Compressive Modulus (CLC)ASTM D66412020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Face loading Compressive StrengthASTM D34102020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Face loading Compressive ModulusASTM D34102020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Constituent Content (Resin & Fibre)ASTM D 3171/ EN 2564/ ISO 11722020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Void ContentASTM D3171/ EN 2564/ ISO 11722020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Water Absorption of CompositesASTM D52292020- 2021
FFOPL-PT006MechanicalComposite (G11- Glass Epoxy Sheet)Shear Properties by V- Notched Rail Shear MethodASTM D70782020- 2021
FFOPL-PT007MechanicalAdhesive Coated StripsTensile Lap shear strengthASTM D10022020- 2021
FFOPL-PT007MechanicalAdhesive Coated StripsLap Shear Strength - Fibre reinforced bondingASTM D58682020- 2021
FFOPL-PT007MechanicalAdhesive Coated StripsLap Shear Strength - rigid to rigid bondingISO 45872020- 2021
FFOPL-PT007MechanicalAdhesive Coated StripsPeel StrengthISO 113392020- 2021
FFOPL-PT008MechanicalRubber VulcanizedTensile StrengthASTM D 412/ IS 3400/ BS ISO 372020- 2021
FFOPL-PT008MechanicalRubber Vulcanized% Elongation at BreakASTM D 412/ IS 3400/ BS ISO 372020- 2021
FFOPL-PT008MechanicalRubber VulcanizedShore A HardnessASTM D 2240/ ISO 868/ IS 13360/ IS 3400/ SATRA TM 205:1999 / BS ISO 76192020- 2021
FFOPL-PT008MechanicalRubber VulcanizedDensityISO 2781/ IS 3400 (Part 9)2020- 2021
FFOPL-PT008MechanicalRubber VulcanizedCompression SetASTM D 395/ IS 3400/ BS ISO 815-12020- 2021
FFOPL-PT008MechanicalRubber VulcanizedSole Abrasion TestSATRA TM 174:1994 / ISO 49462020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedTear StrengthASTM D 624/ IS-3400 Part-XVII/ BS ISO 34-12020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedRebound Resilience TestASTM D 2632/ ISO 46622020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedCarbon Black Percent by Thermogravimetric Analysis (TGA)IS 3400 (Part 22)/ ASTM D 6370/ ISO 113582020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedDielectric BreakdownASTM D1492020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedPolymer ContentASTM D297/ IS 3400 (Part 22)2020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedAsh ContentASTM D297/ IS 3400 (Part 22)2020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedVolatile ContentIS 3660 (Part 2)2020- 2021
FFOPL-PT008Mechanical, Chemical & ElectricalRubber VulcanizedRubber ContentASTM D297/ IS 3400 (Part 22)2020- 2021
FFOPL-PT009MechanicalPolypropyleneShore D HardnessASTM D 2240/ ISO 868/ IS 133602020- 2021
FFOPL-PT009MechanicalPolypropyleneShore A HardnessASTM D 22402020- 2021
FFOPL-PT010ChemicalPlastic FilmOptical DensityAIM CAL 1.1 TP 101-78, Fifth Edition2020- 2021
FFOPL-PT010ChemicalPlastic FilmLinear Thermal ShrinkageASTM D 27322020- 2021
FFOPL-PT010ChemicalPlastic FilmDielectric BreakdownASTM D 1492020- 2021
FFOPL-PT010ChemicalPlastic FilmGlossASTM D 24572020- 2021
FFOPL-PT010ChemicalPlastic FilmHazeASTM D 10032020- 2021
FFOPL-PT011ChemicalEpoxy Resin/ PolypropyleneTransition TemperatureASTM E1356/ ASTM D3418/ ISO 113572019- 2020
FFOPL-PT011ChemicalEpoxy Resin/ PolypropyleneSpecific HeatASTM E19522020- 2021
FFOPL-PT011ChemicalEpoxy Resin/ PolypropyleneEnthalpy of PolymerisationASTM E2160/ ASTM D34172020- 2021
FFOPL-PT012ChemicalPolyolefinOxidative Induction TimeASTM D38952020- 2021
FFOPL-PT014MechanicalAdhesiveShear Strength of Adhesives using Pin & Collar SpecimenASTM D45622020- 2021
FFOPL-PT015ElectricalPolymerVolume ResistivityASTM D2572020- 2021
FFOPL-PT016ChemicalContainer/ PouchesMigration Studies in Plastic Materials (Using Simulant A, B, C)IS 98452020- 2021
FFOPL-PT017MechanicalLeatherTensile StrengthSATRA TM 43/ ISO 33762019- 2020
FFOPL-PT017MechanicalLeatherpH ValueISO 40452020- 2021
FFOPL-PT020Mechanical (Steel PT)Flat Rolled Steel ProductsUltimate Tensile StrengthASTM E82020- 2021
FFOPL-PT020Mechanical (Steel PT)Flat Rolled Steel ProductsYield Strength (By hault of the force method)ASTM E82020- 2021
FFOPL-PT020Mechanical (Steel PT)Flat Rolled Steel Products% of elongation after fractureASTM E82020- 2021
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelCarbon (C)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelSulphur (S)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelManganese (Mn)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelPhosphorus (P)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelSilicon (Si)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelAluminium (Al)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelChromium (Cr)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelNickel (Ni)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelCopper (Cu)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelMolybdenum (Mo)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT021ChemicalFE Based Low Alloy/ Carbon SteelTin (Sn)ASTM E415/ IS 8811/ ASTM E10192019- 2020
FFOPL-PT024ChemicalCoal/ CokeProximate Analysis- MositureIS 1350 (Part 1)/ ASTM D31732019- 2020
FFOPL-PT024ChemicalCoal/ CokeProximate Analysis- Ash ContentIS 1350 (Part 1)/ ASTM D31732019- 2020
FFOPL-PT024ChemicalCoal/ CokeProximate Analysis- Volatile MatterIS 1350 (Part 1)/ ASTM D31732019- 2020
FFOPL-PT024ChemicalCoal/ CokeProximate Analysis- Fixed CarbonIS 1350 (Part 1)/ ASTM D31732019- 2020
FFOPL-PT024ChemicalCoal/ CokeProximate Analysis- Net Calorific ValueIS 1350 (Part 1)/ ASTM D31732019- 2020
FFOPL-PT0026ChemicalOils/ LubricantsViscosity @40ºCASTM D4452020- 2021
FFOPL-PT0026ChemicalOils/ LubricantsViscosity @100ºCASTM D4452020- 2021
FFOPL-PT0026ChemicalOils/ LubricantsTotal Acid Number ASTM D6642020- 2021
FFOPL-PT0027ChemicalPigmentpH of PigmentsIS 34932019- 2020

Note: Please note that if you’re interested in any PT program, we request you to contact our PT Coordinators (Charges will be provided on request)


FINE FINISH PROFICIENCY TESTING PROVIDER
Contact Us:

Ms. Karishma Prabhu: +91 9821933534; karishma.prabhu@finefinish.net
Mr Kishore Prabhu: +91 9870036351; kishore.prabhu@finefinish.net
Mr. Prathamesh Phansekar: +91 9372705934; prathamesh.phansekar@finefinish.net
Ms. Sanyogeeta Pawar: +91 90292 22228/ +91 93727 05939; proficiency.testing@finefinish.net